 [. . . ] 3 Close the cover. 

3

System connections
Right speaker FM aerial TV To TV audio output socket Audio cable (not supplied)
To LINE input socket

Commercially available Subwoofer (Ampliﬁer Built-In)

To audio input socket Left speaker

Red

Wall socket (AC 220 - 240 V ~ 50/60 Hz)

TINSEA452AWZZ

13H R MW 1

4

Turn on your system

Press the ON/STAND-BY button to turn the power on. 

5

Bluetooth one touch connection via NFC
NFC connection for audio playback NFC tag set up

This audio system supports NFC-enabled device with Android 4. 1,  Jelly Bean and higher.  [. . . ] The velcro tapes supplied will help to secure the tags onto the desired location. 

Check that :

Caution :

Your device (smartphone / tablet) has an NFC function. This unit is not in Eco mode. 

Make sure that the NFC tag is placed on a ﬂat and level surface. If you choose not to use the velcro tape,  do not place the NFC tag near metal surface to avoid connection interference during tagging. 

1 Touch your device to the supplied NFC tag. 2 A pop-up window asking whether to proceed
with the Bluetooth connection appears on the device. velcro tape separator (hook type)

Note :

rear view of the NFC tag

To listen to audio via Bluetooth connectivity without NFC tag refer “Pairing with other Bluetooth source devices” on page 8 of the operation manual. Regardless of which tag you used to establish Bluetooth connection with this product,  tapping your device to any of the NFC tags again,  will disconnect the Bluetooth connection. 

6

Listening on AndroidTM devices
Android device playback
Device (Smartphone/Tablet) Connector

1 Insert the connector to the device. 

1 Press the ON/STAND-BY button to turn the power on. 2 Press the USB button (remote control) or FUNCTION button 3 Connect the device (Smartphone/Tablet) to the unit. 4 Press the play button (on main unit,  remote control or device). 
To disconnect the Android device

repeatedly (main unit) to select USB function. 

2 Connect the device to the main unit via USB connector. 

1 Quit the application (apps).  [. . . ] 4 Press the play button (on main unit,  remote control or device). 
To disconnect the Android device

repeatedly (main unit) to select USB function. 

2 Connect the device to the main unit via USB connector. 

1 Quit the application (apps).  [. . . ]